[hdt] The hardware detection tool for Syslinux

Dag Wieers dag at wieers.com
Tue May 5 16:11:17 PDT 2009


On Sun, 19 Apr 2009, Erwan Velu wrote:

>>   * On this particular system the Broadcom NICs have module: Unknown even
>>     though it loads the bnx2 driver fine so the modules.pcimap should
>>  be ok
>
> Could you please report the lspci -n of that board ? I can try reproducing it 
> here to understand that bug.

Ok, I finally got access to this machine again to make the required 
lspci -n output ! Here it is:

00:1c.0 Class 0604: 8086:27d0 (rev 01)
00:1d.0 Class 0c03: 8086:27c8 (rev 01)
00:1d.1 Class 0c03: 8086:27c9 (rev 01)
00:1d.2 Class 0c03: 8086:27ca (rev 01)
00:1d.3 Class 0c03: 8086:27cb (rev 01)
00:1d.7 Class 0c03: 8086:27cc (rev 01)
00:1e.0 Class 0604: 8086:244e (rev e1)
00:1f.0 Class 0601: 8086:27b8 (rev 01)
00:1f.2 Class 0101: 8086:27c0 (rev 01)
01:00.0 Class 0300: 1002:515e (rev 02)
02:00.0 Class 0200: 14e4:1639 (rev 20)
02:00.1 Class 0200: 14e4:1639 (rev 20)
03:00.0 Class 0604: 1014:0308 (rev 01)
04:00.0 Class 0104: 1000:0060 (rev 04)
05:00.0 Class 0604: 1014:0308 (rev 01)
0b:00.0 Class 0604: 1014:0308 (rev 01)
0c:00.0 Class 0c04: 1077:2432 (rev 03)
11:00.0 Class 0604: 1014:0308 (rev 01)
12:00.0 Class 0c04: 1077:2432 (rev 03)
17:00.0 Class 0604: 1014:0308 (rev 01)
18:00.0 Class 0200: 8086:105e (rev 06)
18:00.1 Class 0200: 8086:105e (rev 06)
1d:00.0 Class 0604: 1014:0308 (rev 01)
1e:00.0 Class 0200: 8086:105e (rev 06)
1e:00.1 Class 0200: 8086:105e (rev 06)
23:00.0 Class 0604: 1014:0308 (rev 01)
24:00.0 Class 0200: 8086:105e (rev 06)
24:00.1 Class 0200: 8086:105e (rev 06)
29:00.0 Class 0604: 1014:0308 (rev 01)
2a:00.0 Class 0200: 8086:105e (rev 06)
2a:00.1 Class 0200: 8086:105e (rev 06)

I hope this is still useful to you !

Kind regards,
-- 
--   dag wieers,  dag at wieers.com,  http://dag.wieers.com/   --
[Any errors in spelling, tact or fact are transmission errors]



More information about the HDT mailing list