[klibc] Build problems: klibc with Linux 3.10.7

[leroy christophe]

Le 21/08/2013 17:36, leroy christophe a écrit :
>
> Le 21/08/2013 17:15, maximilian attems a écrit :
>> On Wed, Aug 21, 2013 at 01:39:50PM +0200, leroy christophe wrote:
>>> Le 21/08/2013 12:20, maximilian attems a écrit :
>>>> On Tue, Aug 20, 2013 at 07:44:39AM +0200, leroy christophe wrote:
>>>>> Find attached two patches I have in order to build klibc 2.0.2
>>>>> against kernel 3.8.13
>>>>> We had to introduce those patches when going from kernel 3.6 to 
>>>>> kernel 3.7
>>>>> Hope it helps.
>>>>>
>>>> those patches are wrong and again very brittle.
>>>>
>>>> just use the way it is described in `make help':
>>>>
>>>> A) cd ~/src/linux
>>>>     make defconfig
>>>>     make headers_install
>>>>
>>>> B) cd ~/src/klibc
>>>>     make  KLIBCKERNELSRC=`pwd`/../linux/usr/
>>>>
>>>>
>>> Sorry, but without my patchs, 'make install' fails with the
>>> following message (complete messages file attached)
>>>
>>> # make install V=1 KLIBCARCH=ppc CROSS_COMPILE=ppc-linux-
>>> KLIBCKERNELSRC=/root/gen/trunk/knl/linux/usr/
>>> prefix=/tmp/klibc-install
>> have you done step A previously?
>> It seems you are not compiling against the preconfigured linux headers
>> otherwise the headers_install wouldn't fail.
>>
> Yes, step A is done.
> But the Makefile in src/linux/usr doesn't contain any target 
> `headers_install' so the below command with -C to src/linux/usr fails:
>
> make -C /root/gen/trunk/knl/linux/usr/ ARCH=ppc 
> INSTALL_HDR_PATH=/tmp/klibc-install/lib/klibc/ headers_install
> make[2]: *** No rule to make target `headers_install'.  Stop.
> make[1]: *** [header] Error 2
>
Note that step B is working well.
It is step C, the 'make install', which fails.